Sun Microsystems StorEdge 6900 Series - Manual (Page 121)

Chapter 8 Troubleshooting the Sun StorEdge T3+ Array Devices 105
For Internal Use Only
FIGURE 8-2 Virtualization Engine Alert
...continued from previous page...
----------------------------------------------------------------------
Site : Lab 3286 - DSQA1 Broomfield
Source : diag.xxxxx.xxx.com
Severity : Warning
Category : Message
DeviceId : message:diag.xxxxx.xxx.com
EventType: LogEvent.driver.Fabric_Warning
EventTime: 01/30/2002 11:50:07
Found 1 ’driver.Fabric_Warning’ warning(s) in logfile: /var/adm/messages on
diag.xxxxx.xxx.com (id=809f76b4):
INFORMATION:
Fabric warning
Jan 30 11:46:37 WWN:2b00006022004186 diag.xxxxx.xxx.com fp: [ID 517869
kern.warning] WARNING: fp(2): N_x Port with D_ID=108000,
PWWN=2b00006022004186 reappeared in fabric ( in backup:diag.xxxxx.xxx.com)
----------------------------------------------------------------------
Site : Lab 3286 - DSQA1 Broomfield
Source : diag.xxxxx.xxx.com
Severity : Warning (Actionable)
Category : Host
DeviceId : host:diag.xxxxx.xxx.com
EventType: AlarmEvent.P.hba
EventTime: 01/30/2002 11:50:10
status of hba /devices/pci@1f,4000/pci@2/SUNW,qlc@5/fp@0,0:devctl on
diag.xxxxx.xxx.com changed from NOT CONNECTED to CONNECTED
INFORMATION:
monitors changes in the output of luxadm -e port