For internal use only – Sun Microsystems StorEdge 6900 Series User Manual
Page 133
Chapter 8
Troubleshooting the Sun StorEdge T3+ Array Devices
117
For Internal Use Only
t3
disk
Remove
Component
Red
Y
[ Info/Action ]
disk.u2d3(SEAGAT
E.ST318203FSUN18
G.LRG07139
) was
removed from
diag158
(ip=xxx.
20.67.158
)
Information: The Sun
StorEdge T3+ array
has reported a disk
has been removed
from the chassis.
Recommended action:
Replace the disk
within the 30-minute
power shutdown
window.
t3
interface.
loopcard
Remove
Component
Red
Y
[ Info/Action ]
Information:
The Sun StorEdge T3+
array has reported
that a loopcard has
been removed from
the chassis.
Recommended action:
Replace the loopcard
within the 30-minute
power shutdown
window
t3
power
Remove
Component
Red
Y
[ Info/Action ]
’
power.u1pcu2’(TE
CTROL-CAN.300-
1454-
01(50).008275
)
was removed from
T3
diag213
(ip=xxx.
20.67.213
)
Information: The Sun
StorEdge T3+ array
has reported that a
power cooling unit
has been removed
from the chassis.
Recommended action:
Replace the PCU
within 30-minute
shutdown window.
t3
controller
State
Change+
’
controller.u1ctr
’ in
T3 diag213
(ip=xxx.
20.67.213)
is now Available
(status-state changed
from
disabled
to
ready-enabled
)
Category
Component
EventType
Sev
Action
Description
Information