Using unix commands – Sun Microsystems StorEdge 6900 Series User Manual
Page 12
xii
Sun StorEdge 3900 and 6900 Series Troubleshooting Guide • March 2002
provides detailed information for troubleshooting the virtualization
engines.
describes how to troubleshoot the Sun StorEdge T3+ array devices. Also
included in this chapter is information about the Explorer Data Collection Utility.
discusses ethernet hub troubleshooting. Information associated with the
3COM Ethernet hubs is limited in this guide, however, as this is third-party
information.
Appendix A
provides virtualization engine references, including SRN and SNMP
Reference, an SRN/SNMP single point of failure table, and port communication and
service code tables.
provides a list of SUNWsecfg Error Messages and recommendations for
corrective action.
Using UNIX Commands
This document may not contain information on basic UNIX
®
commands and
procedures such as shutting down the system, booting the system, and configuring
devices.
See one or more of the following for this information:
■
Solaris Handbook for Sun Peripherals
■
AnswerBook2™ online documentation for the Solaris™ operating environment
■
Other software documentation that you received with your system