Sun Microsystems StorEdge 6900 Series - Manual (Page 145)

Appendix A Virtualization Engine References 129
TABLE A-4 provides service codes for the virtualization engine.
TABLE A-3 Port Communication
Port Port Port Number
Daemon Management Programs 20000
Daemon Daemon 20001
Daemon virtualization engine 25000
virtualization engine virtualization engine 25001
TABLE A-4 Service Codes
Code
Number Cause Corrective Action
005 PCI bus parity error. • Replace virtualization engine.
24 The attempt to report one error resulted in
another error. • Cycle power to the virtualization engine.
40 Corrupt database • Clear SAN database
• Cycle power to the virtualization engine.
• Import SAN zone configuration
41 Corrupt database • Clear SAN database
• Cycle power to the virtualization engine
• Import SAN zone configuration
42 Zone mapping database • Import SAN zone configuration
050 This message indicates that an attempt to
write a value into non-volatile storage
failed. It could be a hardware failure, or it
could be that one of the databases stored in
Flash memory could not accept the entry
being added. • Clear the SAN database.
• Cycle power to the virtualization engine.
051 Cannot erase FLASH memory. • Replace virtualization engine.
53 Unauthorized cabling configuration • Check cabling. Ensure server/switch
connects to host-side and storage connects
to device side of virtualization engine
virtualization engine.
• If necessary, clear SAN database.
• If necessary, cycle virtualization engine
power.
• If necessary, import SAN zone
configuration.