Sntp client commands – Multi-Tech Systems MTS2SA-T User Manual
Page 57

Chapter 4 – Command Line Interface (CLI)
Multi-Tech Systems, Inc. MultiConnect Serial-to-Serial Adapter User Guide (S000354A)
57
SNTP Client Commands – Setup
SNTP Client Commands
Command Syntax
set sntp client
Description
Starts the SNTP Client to contact the configured server on UDP port 123
and set the local time.
Default Value
Disable
Success
OK
Error
1. Too few arguments
“Usage: set sntp-client
Type set sntp-client ? for more information”
Command Syntax
set sntp-client ntp-server-name
Description
Sets the NTP server IP address to which the SNTP Client has to contact to
update the time.
Default Value
0.0.0.0
Success
OK
Error
1. Invalid
arguments
"error: Invalid IP address"
Type set sntp-client ? for more information”
2. Too few arguments
“Usage: set sntp-client ntp-server-name
Type set sntp-client ntp-server-name ? for more information”
Command Syntax
set sntp-client time-zone
Description
Sets the time zone.
Default Value
UTC
Success
OK
Error
1. Invalid
arguments
"error: Invalid Time Zone"
2. Too few arguments
“Usage: set sntp-client time-zone
Type set sntp-client time-zone ? for more information”
Command Syntax
set sntp-client time-zone-offset <+/-hh:mm>
where
hh = 00 to 23
mm = 00 to 59
Description
Sets the offset time from UTC.
Default Value
+00:00
Success
OK
Error
1. Invalid
arguments
"error: Invalid Offset"
2. Too few arguments
“Usage: set sntp-client time-zone-offset <+/-hh:mm>
Type set sntp-client time-zone-offset ? for more information”