Multi-Tech Systems MTS2SA-T User Manual
Page 50

Chapter 4 – Command Line Interface (CLI)
Multi-Tech Systems, Inc. MultiConnect Serial-to-Serial Adapter User Guide (S000354A)
50
SMTP Client Commands – Setup
Command Syntax
set send-mail to-address
Description
Sets the email-address as one of the primary addressee. This is the default
email address to which email messages are sent.
Default Value
NULL
Success
OK
Error
1. Too few arguments
“Usage: set send-mail to-address
Type 'set send-mail to-address
2. Invalid to-address number
“ERROR: to-address numbers supported: [1 to 5]
Type 'set send-mail to-address
Command Syntax
set send-mail cc-address
Description
Sets the email-address as the alternate addressee (carbon copy). This is
the default email address that the primary addressee's email messages are
copied.
Default Value
NULL
Success
OK
Error
1. Too few arguments
“Usage: set send-mail cc-address
Type 'set send-mail cc-address
2. Invalid to-address number
“ERROR: cc-address numbers supported: [1 to 5]
Type 'set send-mail cc-address
Command Syntax
set send-mail reply-to-address
Description
Sets the email address to be used when the recipient uses the reply-to
button.
Default Value
NULL
Success
OK
Error
1. Too few arguments
“Usage: set send-mail reply-to-address
Type 'set send-mail reply-to-address ?' for more information”
Command Syntax
set send-mail subject
Description
Sets the email header subject field to the given data.
Default Value
NULL
Success
OK
Error
1. Too few arguments
“Usage: set send-mail subject
Type 'set send-mail subject ?' for more information”