Multi-Tech Systems MTS2SA-T - Manual (Page 45)

Chapter 4 – Command Line Interface (CLI)
Multi-Tech Systems, Inc. MultiConnect Serial-to-Serial Adapter User Guide (S000354A) 45
PPP Commands – Show
Command Syntax show ppp ppp0 configuration
Description Displays:
PPP Status (enabled/disabled)
Authentication status
Authentication type
Username and password for authentication
Compression status
Compression type
IPCP Mode
Local IP Address
Remote IP Address
Default Value NA
Success OK
Error 1. Too few arguments
Possible argument(s) are
configuration ip-addr
statistics link-status
2. Invalid argument
Invalid argument
Valid argument(s) are
configuration ip-addr
statistics link-status
Command Syntax show ppp ip-addr
Description Displays:
Local IP Address
Remote IP Address
Default Value NA
Success OK
Error 1. Too few arguments
Possible argument(s) are
configuration ip-addr
statistics link-status
2. Invalid argument
Invalid argument
Valid argument(s) are
configuration ip-addr
statistics link-status
Command Syntax show ppp link-status
Description Displays the link status on ppp interface.
Default Value -
Success OK
Up / Down
Error 1. Too few arguments
Possible argument(s) are
configuration ip-addr
statistics link-status
2. Invalid argument
Invalid argument
Valid argument(s) are
configuration ip-addr
statistics link-status