Ip setup commands – Multi-Tech Systems MTS2SA-T User Manual
Page 23

Chapter 4 – Command Line Interface (CLI)
Multi-Tech Systems, Inc. MultiConnect Serial-to-Serial Adapter User Guide (S000354A)
23
IP Commands – Setup
IP Setup Commands
Command Syntax
set ip dns
Description
Enables/disables the DNS client.
Default Value
Enabled
Success
OK
Error
1. Too few arguments
“Usage: set ip dns
Type ‘set ip dns ?’ for more information”
2. Invalid
string
Type ‘set ip dns ?’ for more information”
Command Syntax
set ip hostname
Description
Sets the host name of the MultiConnect IP.
Default Value
“MultiConnectIP”
Success
OK
Error
1. Too few arguments
“Usage: set ip hostname
Type ‘set ip hostname ?’ for more information”
Command Syntax
set ip pri-dns
Description
Sets the primary DNS IP address to 0.0.0.0.
Default Value
0.0.0.0
Success
OK
Error
1. Too few arguments
“Usage: set ip pri-dns
Type ‘set ip pri-dns ?’ for more information”
2. Invalid
IP
Address
“error: Invalid IP address
Type ‘set ip pri-dns ?’ for more information”
Command Syntax
set ip sec-dns
Description
Sets the secondary DNS IP address to 0.0.0.0.
Default Value
0.0.0.0
Success
OK
Error
1. Too few arguments
“Usage: set ip sec-dns
Type ‘set ip sec-dns ?’ for more information”
2. Invalid
IP
Address
“error: Invalid IP address
Type ‘set ip sec-dns ?’ for more information”
Command Syntax
set ip syslogd
Description
Enables/Disables syslogd.
Default Value
Disable
Success
OK
Error
1. Too few arguments
“Usage: set ip syslogd
Type ‘set ip syslogd ?’ for more information”