Smtp client commands – Multi-Tech Systems MTS2SA-T User Manual
Page 49

Chapter 4 – Command Line Interface (CLI)
Multi-Tech Systems, Inc. MultiConnect Serial-to-Serial Adapter User Guide (S000354A)
49
SMTP Client Commands – Setup
SMTP Client Commands
The commands in this section are listed in the order in which they might be used.
Command Syntax
set send-mail smtp-server-name
Description
Sets the SMTP server name or IP address. Server names must be such
that they can be resolved by the DNS.
Default Value
NULL
Success
OK
Error
1. Too few arguments
“Usage: set send-mail smtp-server-name
Type 'set send-mail smtp-server-name ?' for more information”
2. Invalid name/IP address
“ERROR: Invalid SMTP Server Name/IP Address”
Command Syntax
set send-mail smtp-server-port
Description
Sets the SMTP Server port.
Default Value
25
Success
OK
Error
1. Too few arguments
“Usage: set send-mail smtp-server-port
Type 'set send-mail smtp-server-port ?' for more information”
Command Syntax
set send-mail host-name
Description
Sets the SMTP Client host name.
Default Value
NULL
Success
OK
Error
1. Too few arguments
“Usage: set send-mail host-name
Type 'set send-mail host-name ?' for more information”
Command Syntax
set send-mail from-address-identity
Description
Sets the ‘From:’ description in the email header as
Default Value
NULL
Success
OK
Error
1. Too few arguments
“Usage: set send-mail from-address-identity
Type 'set send-mail from-address-identity ?' for more information”
Command Syntax
set send-mail from-address
Description
Sets the email-address as the Default From address information.
Default Value
NULL
Success
OK
Error
1. Too few arguments
“Usage: set send-mail from-address
Type 'set send-mail from-address ?' for more information”