Multi-Tech Systems MTS2SA-T - Manual (Page 56)

Chapter 4 – Command Line Interface (CLI)
Multi-Tech Systems, Inc. MultiConnect Serial-to-Serial Adapter User Guide (S000354A) 56
FTP Client Commands – Setup
Command Syntax ftp < [-l] [-t] [-r] > [-p]
Description Triggers the FTP client to establish the FTP session with the remote server
and to perform the required action according to the specified option.
-p : Opens the Data connection in Passive mode. (If this option is not given,
the data connection will be opened in Active mode by default).
-l : Requests for the directory and lists the contents of the specified
directory in the server.
-t : Requests for the filename and filesize to the transmitted and reads the
data from the host device and transmits to the server.
-r : Requests for the remote filename to be received. It informs the host
device about the size of the file and retrieves the data from the server when
serial device is ready.
Note:
1. FTP session can be aborted by issuing Ctrl+C at any given time.
Default Value NULL
Success OK
Error 1. Invalid arguments
ftp < [-l] [-t] [-r] > [-p]
Type set ftp ? for more information”
2. Too few arguments
“Usage: ftp < [-l] [-t] [-r] > [-p]
Type set ftp ? for more information”
FTP Client Commands – Show
Command Syntax show ftp configuration
Description Displays the FTP profile configured in the MultiConnect IP.
Default Value NULL
Success OK
Error 1. Too few arguments
Possible value(s) are configured.