Multi-Tech Systems MT5600BL-V.90 User Manual
Mt5600ba/bl series
This manual is related to the following products:
Table of contents
Document Outline
- Table of Contents
- Chapter 1 - Description and Features
- Product Description
- About AT Commands
- Features
- Safety Warnings
- Chapter 2 - Installation
- Step 1 - Connect the Modem to Your System
- Step 2 - Install the Modem Driver
- Removing an Old Modem Driver
- Step 3 - Setting Your Country or Region Code
- Step 4 - Install PhoneTools
- Chapter 3 - Using the Front Panel
- Modem Configuration
- LED Indicators
- Liquid Crystal Display (LCD)
- Option Selection
- Menu Structure
- Menu Overview
- Status Trunk
- Basic Options Trunk
- Advanced Options Trunk
- Remote Configuration Options Trunk
- Diagnostic Options Trunk
- Phone Number Memory Options Trunk
- Caller ID Options Trunk
- Menu Options
- Status
- Basic Options
- Advanced Options
- Remote Configuration Options
- Diagnostic Options
- Phone Number Memory Options
- Caller ID Options
- Chapter 4 - Leased Line Operation
- Two-Wire Setup
- Four-Wire Setup
- Dial Backup and Leased-Line Restoral
- Dial Backup and Leased Line Restoral Setup
- Chapter 5 - Remote Configuration
- Basic Procedure
- Setup
- Changing the Remote Configuration Password
- Changing the Remote Escape Character
- Chapter 6 - Callback Security
- Setup Procedures
- Turning Callback Security On and Off
- Assigning Callback Passwords
- Calling Procedure
- Callback Security Commands
- Callback Assignments Form
- Chapter 7 - Troubleshooting
- None of the Indicators Light
- The Modem Does Not Respond to Commands
- The Modem Cannot Connect When Dialing
- The Modem Disconnects While Online
- The Modem Cannot Connect When Answering
- File Transfer Is Slower Than It Should Be
- Data Is Being Lost
- There Are Garbage Characters on the Monitor
- The Modem Doesn't Work with Caller ID
- Fax and Data Software Can't Run at the Same Time
- Appendix A - Regulatory Compliance
- FCC Part 68 Telecom
- Fax Branding Statement
- Canadian Limitations Notice
- EMC, Safety, and R&TTE Directive Compliance
- International Modem Restrictions
- New Zealand Telecom Warning Notice
- South African Notice
- Appendix B - Technical Specifications
- Appendix C - Warranty, Service, and Technical Support
- Multi-Tech Systems, Inc. Warranty & Repairs Policies
- Online Warranty Registration
- Service
- Replacement Parts
- Technical Support
- Internet Sites
- Appendix D - Upgrading the Firmware
- Introduction
- Upgrade Overview
- Step 1 - Identify the Modem Firmware
- Step 2 - Identify the Current Firmware Version
- Step 3 - Download the Upgrade File
- Step 4 - Extract the Upgrade Files
- Step 5 - Clear Your Stored Paramenters
- Step 6 - Upgrade the Modem's Firmware
- Step 7 - Restore Your Parameters
- Appendix E - Installing a Modem Under Linux
- Introduction
- Standard Linux Serial Port Definitions
- Installation
- Setup
- Appendix F - Pin Descriptions
- RS-232 Pin Descriptions
- RS-232 Cable Pinouts
- Leased Line Pinouts
- Index