Pop3 client commands – Multi-Tech Systems MTS2SA-T User Manual
Page 52

Chapter 4 – Command Line Interface (CLI)
Multi-Tech Systems, Inc. MultiConnect Serial-to-Serial Adapter User Guide (S000354A)
52
POP3 Client Commands – Setup
POP3 Client Commands
Command Syntax
set recv-mail server-name
Description
This parameter is set by the host to establish the POP3 connection for
receiving the email from the remote server. This also needs DNS to be
enabled on the MultiConnect IP.
Default Value
None
Success
OK
Error
1. Too few arguments
Usage: set recv-mail server-name
Type 'set recv-mail server-name ?' for more information
2. Invalid string
Type 'set recv-mail server-name ?' for more information
Command Syntax
set recv-mail server-port
Description
This parameter is set by the host to establish the POP3 connection for
receiving email from the remote server.
Default Value
110
Success
OK
Error
1. Too few arguments
Usage: set recv-mail server-port
Type 'set recv-mail server-port ?' for more information
2. Invalid string
Type 'set recv-mail server-port ?' for more information
Command Syntax
set recv-mail mailbox-name
Description
Sets the mail box user name for POP3 server authentication.
Default Value
None
Success
OK
Error
1. Too few arguments
Usage: set recv-mail mailbox-name
Type 'set recv-mail mailbox-name ?' for more information
2. Invalid string
Type 'set recv-mail mailbox-name ?' for more information
Command Syntax
set recv-mail mailbox-password
Description
Sets the mail box password for POP3 server authentication.
Default Value
None
Success
OK
Error
1. Too few arguments
Usage: set recv-mail mailbox-password
Type 'set recv-mail mailbox-password ?' for more information
2. Invalid string
Type 'set recv-mail mailbox-password ?' for more information