Gateway 9715 - Manual (Page 99)

94 www.gateway.com
Chapter 4: Installing Components
6
Align the notch on the new module with the key in the memory module socket and
press the module firmly into the socket. The tabs on the sides of the memory socket
should secure the memory module automatically.
7
Reinstall the DIMM cover.
a
Align the DIMM cover tabs with the top of the memory board.
b
Press in the DIMM cover retainer tab.
c
Press down on the DIMM cover until it clicks into place.
8
Install the memory board by following the instructions in “Installing and removing
memory boards” on page 85 .
9
Follow the instructions in “Closing the server case” on page 72 .
8510702.book Page 94 Thursday, July 7, 2005 11:21 AM