Gateway 9715 - Manual (Page 125)

120 www.gateway.com
Chapter 4: Installing Components
5
Holding the VRM by the edges, lift it from the socket.
6
Place the VRM into an anti-static bag for storage.
7
Replace the processor air baffle by following the instructions in “Removing and
installing the processor air baffle” on page 67 .
8
Follow the instructions in “Closing the server case” on page 72 .
To install a processor core VRM:
1
Follow the instructions in “Preventing static electricity discharge” on page 65 .
2
Follow the instructions in “Opening the server case” on page 66 .
3
Remove the processor air baffle by following the instructions in “Removing and
installing the processor air baffle” on page 67 .
Important
The processor core VRM sockets are located on the system board,
under the center brace, however you do not need to remove the center
brace to install or remove the VRMs.
8510702.book Page 120 Thursday, July 7, 2005 11:21 AM