Gateway 9715 User Manual
Page 36
31
www.gateway.com
Configuring SCSI features
To access and change the Adapter Properties List:
1
Follow the instructions in
“To access the LSI Logic MPT SCSI Setup Utility:” on page 27
.
2
Use the up and down arrow keys to highlight the adapter to be configured, then press
E
NTER
. The following message will be displayed:
Scanning for devices...
When the utility is finished scanning for devices, the Adapter Properties screen opens.
3
Use the up and down arrow keys to select options from the list and +/- to change
the settings:
■
■
Host SCSI ID (
0
to
15
)
■
SCSI Bus Scan Order (
Low to High
(0 - Max)
or
High to Low
(Max - 0))
■
Removable Media Support (
None
,
Boot Drive Only
, or
With Media Installed
)
■
CHS (Cylinder Head Sector) Mapping (
SCSI Plug and Play Mapping
or
Alternate CHS
Mapping
)
■
Spinup Delay (Secs) (
1
to
15
)
Important
If the RAID on MotherBoard (ROMB) feature is not enabled, the
following message will be displayed:
Current firmware does not support IME RAID type. Press any
key to continue.
8510702.book Page 31 Thursday, July 7, 2005 11:21 AM