Gateway 9715 - Manual (Page 150)

145 www.gateway.com
Replacing a hot-swap fan
Replacing a hot-swap fan
If you are adding redundant hot-swap fans to your server, you must update the FRU/SDR.
For more information, see
“FRU/SDR Load utility” on page 54 .
To replace a hot-swap fan:
1
Follow the instructions in “Preventing static electricity discharge” on page 65 .
2
Follow the instructions in “Opening the server case” on page 66 , but do not unplug
or turn off the server.
3
Locate the fan to be replaced. An orange LED indicates a failed fan.
Important
Make sure that you replace a fan with an identical replacement fan.
Fan LED
8510702.book Page 145 Thursday, July 7, 2005 11:21 AM