Gateway 9715 - Manual (Page 34)

29 www.gateway.com
Configuring SCSI features
4
Use the up and down arrow keys to select one of the following options:
■ Cancel Exit - To cancel the exit and return to the adapter or device properties screen.
■ Save Changes then exit this menu - To save your changes and exit the menu.
■ Discard changes then exit this menu - To discard your changes and exit the menu.
■ Exit the Configuration Utility - To exit the utility entirely.
If you made changes, the system will reboot when you exit the utility.
To access and change the Global Properties List:
1
Follow the instructions in “To access the LSI Logic MPT SCSI Setup Utility:” on page 27 .
2
Press F2 to access the menu bar at the top of the screen, then press the H OME and
E ND keys to select the Global Properties List . The Global Properties List screen opens.
3
Use the up and down arrow keys to select options from the list and +/- to change
the settings:
■ Pause when boot alert displayed ( Yes or No )
■ Boot information display mode ( Verbose or Terse )
■ Negotiate with Devices ( Supported or All )
■ Video Mode ( Color or Monochrome )
8510702.book Page 29 Thursday, July 7, 2005 11:21 AM