Gateway 9715 - Manual (Page 153)

148 www.gateway.com
Chapter 4: Installing Components
9
Push the battery toward the larger prongs until the edge of the battery clears the small
prongs, then pull up on the battery and lift it from the server.
10
Make sure that the positive (+) side of the new battery is facing correctly, then press
the new battery into the socket until it snaps into place.
11
Replace the memory board or memory board air baffle by following the instructions
in
“Installing and removing memory boards” on page 85 .
12
Follow the instructions in “Closing the server case” on page 72 .
13
Turn on the server.
14
Press any key when the Gateway logo screen appears during startup. The System
Options menu opens.
15
Select the BIOS Setup utility, then press E NTER . The BIOS Setup utility opens.
16
Restore any BIOS settings that you wrote down in Step 3 .
17
Save all your settings and close the BIOS Setup utility.
8510702.book Page 148 Thursday, July 7, 2005 11:21 AM