Gateway 9715 - Manual (Page 28)

23 www.gateway.com
Controlling your server
To configure the console:
1
Turn on the console system and let the operating system start.
2
Click Start , All Programs , Accessories , Communications , then click Hyperterminal .
3
When the Connection Description window opens, enter Guest in the Name field, then
click OK .
4
When the Connect To window opens, click the COM port of the console to which the
null modem cable is connected (for example, COM1).
5
When the COM1 Properties window opens, make the following settings:
■ Bits per second to 115200
■ Flow control to Hardware (CTS/RTS)
■ Leave the other settings at their default values
6
Click OK to accept the settings and enter the hyperterminal screen.
7
Turn on the server. The console starts displaying the redirection after the video on
the server synchronizes.
8510702.book Page 23 Thursday, July 7, 2005 11:21 AM