Gateway 9715 - Manual (Page 157)

152 www.gateway.com
Chapter 4: Installing Components
22
Reinstall all PCI expansion cards by following the instructions in “Cold installation
or removal of PCI expansion cards” on page 104 .
23
Reinstall the memory boards and memory board air baffles by following the
instructions in
“Installing and removing memory boards” on page 85 .
24
Reinstall the processor thermal blanks, processors, and heat sinks by following the
instructions in
“Installation and removal of processors” on page 111 .
25
Reinstall the processor air baffle by following the instructions in “Removing and
installing the processor air baffle” on page 67 .
26
Connect any remaining cables to the system board.
27
Follow the instructions in “Closing the server case” on page 72 .
28
Turn on your server.
29
Press any key when the Gateway logo screen appears during startup. The System Options
menu opens.
30
Select the BIOS Setup utility , then press E NTER . The BIOS Setup utility opens.
31
Check BIOS settings to make sure that they detect the server’s new hardware, then
save your changes (if any) and close the BIOS Setup utility.
8510702.book Page 152 Thursday, July 7, 2005 11:21 AM