Gateway 9715 - Manual (Page 148)

143 www.gateway.com
Replacing the front panel I/O board
Replacing the front panel I/O board
To replace the front panel I/O board:
1
Follow the instructions in “Preventing static electricity discharge” on page 65 .
2
Follow the instructions in “Opening the server case” on page 66 .
3
Remove the processor air baffle by following the instructions in “Removing and
installing the processor air baffle” on page 67 .
4
Disconnect the front panel I/O board and control panel cables from the front panel
board.
5
Loosen the blue, captive thumbscrew in the center of the front panel I/O board, then
slide the board back until the mounting tabs disengage from the board.
6
Remove the board from the server and store it in an anti-static bag.
Blue, captive thumbscrew
Mounting
tab
8510702.book Page 143 Thursday, July 7, 2005 11:21 AM