Gateway 9715 - Manual (Page 37)

32 www.gateway.com
Chapter 2: Setting Up Your Server
■ Secondary Cluster Server ( No or Yes )
■ Termination Control ( Auto )
■ (to discard the changes and restore the default configuration
of the adapters)
4
If you selected anything but , go to Step 6 .
- OR -
If you selected , press E NTER . The Device Properties screen opens.
5
Use the up and down arrow keys to select options from the list and +/- to change
the settings:
■ MB/Sec ( 320 )
■ MT/Sec ( 0 or 5 , 10 , 20 , 40 , 80 , 160 )
■ Data Width ( 16 or 8 )
■ Scan ID ( Yes or No )
■ Scan Luns >0 ( Yes or No )
Important
The Device Properties screen is large and requires the use of the
arrow keys (or scroll bars) to scroll left and to scroll down to see all
of the configuration options.
8510702.book Page 32 Thursday, July 7, 2005 11:21 AM