beautypg.com

Installing drives, Installing and removing the cd or dvd drive – Gateway 9715 User Manual

Page 78

background image

73

www.gateway.com

Installing drives

Installing drives

Your server’s basic configuration includes one CD (standard) or DVD (optional) drive. Your
server also has two additional 5.25-inch drive bays, which can accommodate two
half-height or one full height SCSI tape drive.

Your server can have as many as ten, hot-swap SCSI drives in hot-swap drive bays.

As you prepare to install drives, remember:

Before you install a drive, see the drive’s documentation for information on
configuring the drive, setting drive jumpers, and attaching cables.

You may need to configure the drives you install using the BIOS Setup utility.

To open the BIOS Setup utility, press any key at startup to open the System Options
menu, then select the

BIOS Setup utility

and press E

NTER

. The BIOS Setup utility

opens.

Installing and removing the CD or DVD drive

To remove the CD or DVD drive:

1

Follow the instructions in

“Preventing static electricity discharge” on page 65

.

Caution

CD, DVD, and tape drives are not hot-swappable, so the server must
be turned off and the AC power cords removed prior to installing,
removing, or servicing these devices.

5.25-inch

drive bays (2)

CD or

DVD drive

Hot-swap hard drive
bays (10)

8510702.book Page 73 Thursday, July 7, 2005 11:21 AM