Gateway 9715 - Manual (Page 111)

106 www.gateway.com
Chapter 4: Installing Components
Fibre channel module
The fibre channel module (optional) is an intelligent, high-performance adapter with a
Qlogic ISP2322 FC controller, designed for high-end server systems like this one. It
combines a RISC processor with two 2 Gbps transceivers, a 64-bit, 133 MHz PCI-X interface,
and a Fibre Channel Protocol Manager (FPM). Both Private Loop Direct Attach (PLDA) and
Fabric Loop Attach (FLA) devices are fully supported by the module, which operates at
either 1 Gbps (500 meter cables or less) or 2 Gbps (300 meter cables or less). For
specifications on this card, see
“Fibre channel card specifications” on page 229 .
Activity Green LED Orange LED Red LED
System powered off Off Off Off
Prior to firmware initialization On Off Off
Post firmware initialization
- OR -
Loss of synchronization
On Off On
1Gbps link established One flash every 4
seconds Off Off
1Gbps activity One flash every 4
seconds On Off
Green LED
Orange LED
Red LED
Red LED
Orange LED
Green LED
LC-style optical
connector
LC-style optical
connector
Port J1
Port J2
8510702.book Page 106 Thursday, July 7, 2005 11:21 AM