GarrettCom MNS-6K 4.1.4 - Manual (Page 52)

M A G N U M 6 K S W I T C H E S , M N S - 6 K U S E R G U I D E
System Contact : [email protected]
System Location : Fremont, CA
System ObjectId : 1.3.6.1.4.1.553.12.6
Magnum6K25#
F
IGURE
31 - System parameters using the show setup command. Most parameters here cannot be
changed
Magnum6K25#
show sysconfig
System Name : Magnum6K25
System Contact : [email protected]
System Location : HO, Fremont, CA
Boot Mode : manual
Inactivity Timeout(min) : 10
Address Age Interval(min) : 300
Inbound Telnet Enabled : Yes
Web Agent Enabled : Yes
Time Zone : GMT-08hours:00minutes
Day Light Time Rule : USA
System UpTime : 7 Days 12 Hours 30 Mins 46 Secs
Magnum6K25#
F IGURE 32 -
System parameters using the show sysconfig command. Most parameters here can be
changed.
System variables can be changed. Below is a list of system variables which GarrettCom
recommends changing.
System Name: Using a unique name helps you to identify individual devices in a
network.
System Contact and System Information: This is helpful for identifying the
administrator responsible for the switch and for identifying the locations of individual
switches.
To set these variables, change the mode to be SNMP configuration mode from the
manager mode.
Syntax snmp
Syntax setvar [sysname|syscontact|syslocation]= where string is a character
string, maximum 24 characters long
51