GarrettCom MNS-6K 4.1.4 - Manual (Page 34)

M A G N U M 6 K S W I T C H E S , M N S - 6 K U S E R G U I D E
Magnum6K25(user)##
useraccess user=peter group=vlan,user,system type=read enable
Access rules set for Read Operation.
Groups: All Command Groups.
ML2400(user)## show users
Sl# Username Access Permissions
--- -------- ------------------
1 manager Manager
Read Access: All Command Groups
Write Access: All Command Groups
2 operator Operator
Read Access: All Command Groups
Write Access: All Command Groups
3 peter Manager
Read Access: All Command Groups
Write Access: All Command Groups
Magnum6K25(user)##
exit
Magnum6K25#
F
IGURE 12 – Creating user access privileges
After this command, user Peter will not have read access to the VLAN, system and user
groups.
In another example, if the user Peter is not allowed to access the switch using telnet, the
access can be blocked using the steps shown below:
Magnum6K25#
user
Magnum6K25(user)##
add user=peter level=2
Enter User Password :*****
Confirm New Password :*****
Magnum6K25(user)##
useraccess user=peter service=telnet disable
Telnet Access Disabled.
F IGURE 13 – Creating user access privileges
After this command, user Peter will not have telnet access to the switch. User Peter only
has console access or SWM access (or access via SSH for MNS-6K-SECURE)
The user “peter” has to be added before this command can be successfully
executed.
33