GarrettCom MNS-6K 4.1.4 - Manual (Page 300)

M A G N U M 6 K S W I T C H E S , M N S - 6 K U S E R G U I D E
Syntax authtrap - enables or disables authentication traps generation
Syntax show-authtrap - displays the current value of authentication trap status.
Syntax deftrap community= - defines the default community string to be used when sending traps.
When user does not specify the trap community name when setting a trap station using the “trap”
command, the default trap community name is used
Syntax show-deftrap - displays the current value of default trap
Syntax trap id= [type=] [host=]
[community=] [port=<1-65534>] - define the trap and inform manager stations. The
station can receive v1, v2 traps and/or inform notifications. An inform notification is an acknowledgments
that a trap has been received. A user can add up to 5 stations.
Syntax show-trap [id=]- shows the configured trap stations in tabular format - id is optional and is
the number corresponding to the trap entry number in the table
Syntax com2sec id= [secname=] [source=]
[community=] - a part of the View based Access control model (VACM) as defined
in RFC 2275. This specifies the mapping from a source/community pair to a security name. On MNS-
6K, up to 10 entries can be specified
Syntax group id= [groupname=]
[model=] [com2secid=] - a part of the View based Access
control model (VACM) as defined in RFC 2275. This command defines the mapping from sec model or
a sec name to a group. A sec model is one of v1, v2c, or usm. On MNS-6K, up to 10 entries can be
specified
Syntax show-group [id=] - display all or specific group entries - id is optional and is the number
corresponding to the group entry number in the table
Syntax view id= [viewname=] [type=]
[subtree=] [mask=] - a part of the View based Access control model
(VACM) as defined in RFC 2275. This command defines a manager or group or manager stations
what it can access inside the MIB object tree. On MNS-6K, up to 10 entries can be specified
Syntax show-view [id=] - display all or specific view entries - id is optional and is the number
corresponding to the view entry number in the table
Syntax user id= [username=]
[usertype=] [authpass=]
[privpass=] [level=] [subtree=] for
quickly adding or deleting v3 USM based security, this command adds user entries. MNS-6K allows up
299