GarrettCom MNS-6K 4.1.4 - Manual (Page 19)

xviii
F
IGURE
163 – Make sure to select the Xmodem protocol and the proper directory where the
configuration is saved. Click on Receive. This starts the file transfer. ......................................... 345
F IGURE 164 – Status window for Xmodem (using HyperTerminal under Windows XP) .................... 346
F IGURE 165 – Message which shows the completion of the file transfer (from ‘saveconf’ command) ........ 346
F IGURE 166 – Example of saveconf command for tftp ......................................................................... 346
F IGURE 167 – Upgrade using serial connection ................................................................................... 349
F
IGURE
168 – File upload status window under Xmodem (using HyperTerminal under Windows
XP) ........................................................................................................................................ 349
F IGURE 169 – upgrading the switch using the serial interface ............................................................... 350
F
IGURE
170 – Dialog for upgrading the image using tftp ..................................................................... 351
F IGURE 171 – Updating the boot code over the network using the upgrade command. Make sure
to reboot the switch after the boot loader upgrade is completed .................................................... 353