GarrettCom MNS-6K 4.1.4 - Manual (Page 285)

M A G N U M 6 K S W I T C H E S , M N S - 6 K U S E R G U I D E
Syntax saveconf mode= [] [file=] – saves the
configuration on the network using tftp, ftp or serial protocols
Syntax loadconf mode= [] [file=] – loads the previously
saved configuration from the network using tftp, ftp or serial protocols
Syntax kill config [save=module_name] – resets the system configuration. The module_name option does not
reset the specific module parameters. The modules are system, event, port, bridge, stp, ps, mirror, sntp, vlan, gvrp
and snmp
Syntax show session – display telnet sessions active on the switch
Syntax kill session id= - kill a specific telnet session
Syntax set ftp mode= - set the ftp mode of operation
Syntax show ftp- display the current ftp operation mode
Syntax ftp [type=]
[host=] [ip=] [file=] [user=]
[pass=] – upload and download information using ftp command
Where
- different ftp operations
[type=] – optional type field. This is useful
to specify whether a log file or host file is uploaded or downloaded. This can also
perform the task of exporting a configuration file or uploading a new image to the
switch
[host=] [ip=] [file=] [user=]
[pass=] – parameters associated with ftp server for proper
communications with the server
Syntax stftp [type=]
[host=] [ip=] [file=] – upload and download
information using sftp command
Where
- different sftp operations – get a file from the server or put the
information on the server or list files on the server or delete files from the server
[type=] – optional type field. This is useful
to specify whether a log file or host file is uploaded or downloaded. This can also
perform the task of exporting a configuration file or uploading a new image to the
switch
[host=] [ip=] [file=] – parameters associated
with tftp server for proper communications with the server
284