GarrettCom MNS-6K 4.1.4 - Manual (Page 314)

M A G N U M 6 K S W I T C H E S , M N S - 6 K U S E R G U I D E
Command Description
set stp type= Set the switch to support RSTP or change it
back to STP. Need to save and reboot the switch
after this command
set time hour=<0-23> min=<0-59>
sec=<0-59> sets the time
set timeformat format=<12|24> set the display time in the 12/24 hour mode
set timezone GMT=[+ or -] hour=<0-
14> min=<0-59> sets the timezone
set vlan type= defines the VLAN type
set-forbid vlan=
forbid= sets the forbid GVRP capability on the ports
specified
set-leave enables or disables the switch to immediately
process a host sending a leave message rather that
wait for the timer to expire
setport monitor=
sniffer= set port mirror settings
set-port port=< port|list|range>
mode= set the port characteristics for IGMP. Block
drops the unregistered multicasts. Forward
forwards unregistered multicasts
set-port port=
default id= sets the default VLAN id. For Magnum 6K
family of switches, the default VLAN id is 1,
unless changed using this command
set-port port=
filter status= enables or disables the VLAN filtering function.
set-port port= join
id= adds the specified port(s) to the specified VLAN
id
set-port port=
leave id= releases a specific port from a VLAN
set-port port=
tagging id= status=untagged> defines whether the outgoing packets from a port
will be tagged or untagged.
313