GarrettCom MNS-6K 4.1.4 - Manual (Page 287)

M A G N U M 6 K S W I T C H E S , M N S - 6 K U S E R G U I D E
Syntax show sysconfig – reviews settable system parameters
Syntax show time – shows the system time
Syntax show timezone – shows the system timezone
Syntax show date – shows the system date
Syntax show uptime – shows the amount of time the switch has been operational
Syntax show config [module=] – displays the configuration
Syntax set secrets - sets the system parameter to display or hide the passwords
Syntax kill config [save=module-name] – resets the system configuration. The module-name option does
not reset the specific module parameters. The modules are listed below
Chapter 4 – IPv6
Syntax ipconfig [ip=] [mask=] [dgw=]
[add|del] – configure and IPv6 address. The add/delete option can be used to add or delete
IPv4/IPv6 addresses
Syntax show ipconfig – display the IP configuration information – including IPv6 address
Syntax ping6 - pings an IPv6 station
Syntax show ipv6 - displays the IPv6 information
Syntax ftp - ftp to an IPv6 station
Syntax telnet - telnet to an IPv6 station
Chapter 5 – DHCP Server
Syntax - dhcpsrv - start or stop the DHCP server. By default, the server is off
Syntax - config startip= endip= mask= [dns=< dns1,
dns2,..dns10>] [gateway=] [leasetime=] –
configure the DHCP lease request parameters such as starting IP address, ending IP address, DNS server
parameters, default gateway IP address and lease time
286