GarrettCom MNS-6K 4.1.4 - Manual (Page 136)

M A G N U M 6 K S W I T C H E S , M N S - 6 K U S E R G U I D E
Syntax add id= [name=] port=
[forbid=] []
Disabling Management on VLAN
Use the option when creating a VLAN as shown in the add id command above.
Starting VLANs
Syntax start vlan=
Saving the configuration
Syntax save
Editing VLANs
Syntax edit id= [name=] port=
[]
Displaying the VLAN information
Syntax show vlan [] [port=]
Magnum6K25#
vlan
Magnum6K25(tag-vlan)##
add id=2 name=test port=1-10
Magnum6K25(tag -vlan)##
start vlan=all
Magnum6K25(tag -vlan)##
save
Saving current configuration...
Configuration saved
F
IGURE
81 – configuring VLANs on Magnum 6K switch
Private VLANs
Private VLANs are VLANs which are private to a given switch in a network. For Magnum 6K
family of switches, the Private VLANs are usually restricted to a single switch. Private
VLANs are implemented on Magnum 6K family of switches using Port based VLAN. See the
section on Port VLAN for additional information.
The reasons Private VLANs are constructed are for security. For example, if some confidential
data were residing on VLAN 5, then only the people connected to that switch on VLAN 5 can
135