Igure, Command to check for dynamically assigned vlans, Converting a dynamic vlan to a static vlan – GarrettCom MNS-6K 4.1.4 User Manual
Page 235
M A G N U M 6 K S W I T C H E S , M N S - 6 K U S E R G U I D E
============================================
VLAN ID | NAME
| VLAN
STATUS
============================================
1
| Default VLAN | Static
Active
2
| Blue
| Static
Active
10
| dyn10
| Dynamic
Active
Magnum6K25(gvrp)##
F
IGURE
130
– Command to check for dynamically assigned VLANs
Note that port 10 must be enabled and configured to learn for it to be assigned to the dynamic
VLAN. To send advertisements, one or more tagged or untagged static VLANs must be
configured on one (or more) switches with GVRP enabled. MNS-6K allows a dynamic VLAN to
be converted to a static VLAN. The command to use is
Syntax static vlan=
Note “show vlan type=tag” will display VID in case the VID is not known.
Magnum6K25#
gvrp
Magnum6K25(gvrp)##
show-vlan
============================================
VLAN ID | NAME
| VLAN
STATUS
============================================
1
| Default VLAN | Static
Active
2
| Blue
| Static
Active
10
| dyn10
| Dynamic
Active
Magnum6K25(gvrp)##
static vlan=10
Magnum6K25(gvrp)##
show-vlan
============================================
VLAN ID | NAME
| VLAN
STATUS
============================================
1
| Default VLAN | Static
Active
2
| Blue
| Static
Active
10
| dyn10
| Static
Active
F
IGURE
131
– Converting a dynamic VLAN to a static VLAN
Per Port
“unknown
VLAN” (GVRP)
Per-Port Static VLAN Options
Tagged or Untagged
Auto
Forbid
VLAN 10 is converted to a
static VLAN
234