beautypg.com

Chapter 20 – snmp – GarrettCom MNS-6K 4.1.4 User Manual

Page 299

background image

M A G N U M 6 K S W I T C H E S , M N S - 6 K U S E R G U I D E


Syntax set-forbid vlan= forbid= - sets the forbid GVRP
capability on the ports specified

Syntax
show-forbid – display the ports with GVRP forbid capabilities

Chapter 20 – SNMP


Syntax
snmp – enter the SNMP Configuration mode

Syntax
snmpv3 – enter the SNMP V3 configuration mode – note enable SNMP V3 by using the

“set

snmp”

command which follows


Syntax
set snmp type= - define the version of SNMP to use – the option all supports all versions

(v1, v2 and v3) – v1 restricts SNMP to v1 only. By default – SNMP v1only is enabled


Syntax
show active-snmp – shows the version of SNMP currently in use

Syntax
community [write=] [read=] [trap=

community>] – set the necessary community strings


Syntax authtraps - enables or disables authentication traps generation

Syntax traps type=

Snmp,Enterprise |Rmon,Enterprise|All> ip= - add v1 traps as well as
define the trap receiver


Syntax show snmp – displays the SNMP configuration information

Syntax
mgrip ip= - adds or deletes a management station, specified by the

IP address, which can query SNMP variables from the switch. This is done to protect the switch from
being polled by unauthorized managers. Maximum of five stations allowed.


Syntax
setvar [sysname|syscontact|syslocation]= sets the system name, contact and

location. All parameters are optional but a user must supply at least one parameter


Syntax
quickcfg - quick setup for snmpv3 configuration. It automatically configures a default VACM (view-

based access control model). This allows any manager station to access the Magnum 6K switch either via
SNMP v1, v2c or v3. The community name is “public”. This command is only intended for first time
users and values can be changed by administrators who want more strict access


Syntax
engineid string= - Every agent has to have an engineID (name) to be able to respond to

SNMPv3 messages. The default engine ID value is “6K_v3Engine”. This command allows the user to
change the engine ID

298

This manual is related to the following products: