FUJITSU INTEGRATED REMOTE MANAGEMENT CONTROLLER IRMC S2/S3 User Manual
Page 59

iRMC S2/S3
59
Configuring and using the serial interface of the iRMC S2/S3
The following values are not shown in the menu and are preset (see
, “Terminal program (VT100+)”):
Bits per second
9600
Data bits
8
Parity
None
.
Stop bits
1
Flow Control
None
Exiting the BIOS / TrustedCore setup utility
Ê
Save your settings and exit the BIOS/TrustedCore setup utility.
Ê
Continue with
section "Testing the LAN interface" on page 47
.