FUJITSU INTEGRATED REMOTE MANAGEMENT CONTROLLER IRMC S2/S3 - Manual (Page 300)

300 iRMC S2/S3
Console Redirection - Redirecting the console
7.15.1.3 Text console redirection while the operating system is running
Depending on the operating system used on the managed server, you can
continue to use console redirection after the BIOS / UEFI POST phase.
DOS
I
Condition:
The BIOS setting for console redirection mode must be set to Enhanced
(see the section "BIOS Text Console - Configure and start text console
redirection" on page 292 ).
If the managed server starts the PRIMERGY ServerView Suite diagnosis
software, you can operate PRIMERGY ServerView Suite diagnosis using
console redirection.
Windows Server 2003 / 2008
Windows Server 2003 / 2008 handles console redirection automatically after the
POST phase. No further settings are necessary. While the operating system is
booting, the Windows Server 2003 SAC console / Windows Server 2008 SAC
console is transferred:
Figure 182: Windows Server 2003 SAC console
Linux
You must configure a Linux operating system in such a way that it handles
console redirection after the POST phase. Once it has been configured, you
have complete remote access.