FUJITSU INTEGRATED REMOTE MANAGEMENT CONTROLLER IRMC S2/S3 User Manual
Page 148

148
iRMC
S2/S3
System Information - Information on the server
System Status
The status of the global error LED, the CSS LED and the identification LED are
shown under
System Status
. You can also switch the PRIMERGY identification
LED on and off.
Figure 67: System Overview page - System Status
Power LED
Power status of the server.
The following statuses are possible:
–
On: “Power ON” (green)
–
On: “Standby mode (green) with text “Suspend to RAM (Standby)”.
–
Off: “Power OFF” (orange)
Error LED
Informs about the server‘s Global Error LED:
CSS LED
Informs about the server’s CSS (Customer Self Service) LED:
Status Info
(iRMC S2/S3)
Global Error LED
on the Server
Status of the servers
off
does not light up.
No critical event.
on
lights red.
Prefailure event for a non CSS component.
blinking
flashes red.
Critical event.
Status Info
(iRMC S2/S3)
CSS LED on the
Server
Status of the server
off
does not light up.
The server is operational.
on
lights orange.
Prefailure event for a CSS component.
blinking
flashes orange.
Defective CSS component.