FUJITSU INTEGRATED REMOTE MANAGEMENT CONTROLLER IRMC S2/S3 User Manual
Page 46

46
iRMC
S2/S3
Configuring the LAN interface of the iRMC S2/S3
Ê
If you want to use console redirection on the iRMC S2 continue with
"Configuring text console redirection for the iRMC S2" on page 49
.
If you do not want to use text console redirection on the iRMC S2, exit the
BIOS/TrustedCore setup and continue with the next
3.1.3.2
Configuring the LAN interface of the iRMC S3 by using the UEFI
setup Utility
Ê
Call the UEFI setup utility of the managed server. Do this by pressing
[F2]
while the server is booting.
Ê
Call the
iRMC LAN parameter configuration
menu:
Server Mgmt – iRMC LAN Parameters Configuration
Figure 9: iRMC LAN Parameters Configuration Menu