FUJITSU INTEGRATED REMOTE MANAGEMENT CONTROLLER IRMC S2/S3 - Manual (Page 192)

192 iRMC S2/S3
Power Management
Power Restore Policy - Specify behavior of the server after a power outage
The Power Restore Policy group allows you to specify the server’s power
management behavior after a power outage.
Figure 105: Power Options page, Power Restore Policy
Always power off
The server always remains powered down after a power outage.
Always power on
The server is always powered up again after a power outage.
Restore to powered state prior to power loss
The power up/down status of the server is restored to the status prior to
the power outage.
Ê Click Apply to activate your settings.
The configured action will be performed after a power outage.