FUJITSU INTEGRATED REMOTE MANAGEMENT CONTROLLER IRMC S2/S3 - Manual (Page 400)

400 iRMC S2/S3
IPMI OEM Commands supported by the iRMC S2/S3
C0 1A - Set Video Display On/Off
This command allows you to switch the local console on or off.
12.1.2.6 BIOS-specific commands
F1 09 - Get BIOS POST State
This command provides information whether BIOS is in POST.
Request Data - C0 NetFnlLUN: OEM
- 1A Cmd : Command Group Fan Test
1 00 = Set Video Display On
01 = Set Video display Off
Response Data - C4
- 1A
1 Completion Code
Request Data - B8 NetFnlLUN: OEM/Group
- F1 Cmd : Command Group BIOS
1:3 80 28 00 IANA-Enterprise-Number FTS, LS Byte first
4 09 Command Specifier
Response Data - BC
- F1
1 Completion Code
2:4 80 28 00 IANA-Enterprise-Number FTS, LS Byte first
5 [7:1] - reserved
[0] - BIOS POST State : 0 = BIOS is not in POST
1 = BIOS is in POST