FUJITSU INTEGRATED REMOTE MANAGEMENT CONTROLLER IRMC S2/S3 User Manual
Page 200
200
iRMC
S2/S3
Power Consumption
7.8.1
Power Consumption Configuration - Configure
power consumption of the server
The
Power Consumption Configuration
page allows you to specify the mode the
iRMC S2/S3 uses to control the power consumption of your PRIMERGY server.
Figure 110: Power Consumption Configuration page
I
Prerequisite:
The following requirements must be met in order to configure power
consumption control:
–
The managed PRIMERGY server must support this feature.
–
The
Enhanced Speed Step
or the
Processor Power Management
option
must be enabled in the
Advanced
Menu of the BIOS setup.
I
If you set the “Power Limit” power control mode in the
Power Consumption
Options
group or in the S
cheduled Power Consumption Configuration
, the
Power Limit Options
group is also displayed (see
).