FUJITSU INTEGRATED REMOTE MANAGEMENT CONTROLLER IRMC S2/S3 User Manual
Page 307
iRMC S2/S3
307
Console Redirection - Redirecting the console
Enable Local Monitor Off
This option allows you to activate the following options:
–
In full-control mode of an AVR session, you can switch the local
monitor on and off (AVR
Extras
menu, see
–
For users with administrator or OEM permissions, the toggle
button
Turn Off
/
Turn On
is also enabled. This also allows the local
monitor to be switched on and off (see
Figure 188: Advanced Video Redirection page - Local Monitor On / Off
–
You can also configure that the local monitor is switched off
automatically for the duration of an AVR session when an AVR
session is started (see the
Automatic Local Monitor Off when AVR is
started
option).
I
If no concurrent session with Local Monitor Off is active, the local
monitor is automatically switched on again when the AVR session
is closed.
Automatic Local Monitor Off when AVR is started
I
This option only takes effect if
Enable Local Monitor
has been
activated.
If you activate this option, the local monitor is automatically switched off
for the duration of the session when an AVR session is started. After the
AVR session is closed, the local monitor is automatically switched on
again if no concurrent session with Local Monitor Off is active.
I
Parallel AVR sessions:
Even if you switch on the local monitor during your AVR session
(in the AVR menu
Extras
or with the
Turn On
button), the local
monitor is automatically switched off again if a new, concurrent
AVR session is started.
The local monitor is switched on again automatically when all AVR
sessions have been closed.
Ê
Click
Apply
to activate your settings.