FUJITSU INTEGRATED REMOTE MANAGEMENT CONTROLLER IRMC S2/S3 - Manual (Page 106)

106 iRMC S2/S3
Menus of the AVR window
5.3.3 Power Control menu
The Power Control menu allows you to power the server up/down or to reboot the
server:
Figure 39: AVR window - Power Control menu
Power On
Switches the server on.
Power Off
Powers the server down, regardless of the status of the operating
system.
Power Cycle
Powers the server down completely and then powers it up again after a
configured period. You can configure this time in the
Power Cycle Delay
field of the ASR&R Options group (see page 234 ).
Press Power Button
Depending on the operating system installed and the action configured,
you can trigger various actions by briefly pressing the power-off button.
These actions could be shutting down the computer or switching it to
standby mode or sleep mode.
Reset
Completely restarts the server (cold start), regardless of the status of the
operating system.