FUJITSU INTEGRATED REMOTE MANAGEMENT CONTROLLER IRMC S2/S3 - Manual (Page 216)

216 iRMC S2/S3
Sensors - Check status of the sensors
Select all
Selects all temperature sensors.
Deselect all
All selections are cancelled.
Ê Select the sensors for which you wish to define the behavior in the event that
the critical temperature is reached.
Ê Define the behavior in the event that the critical temperature is reached
using the list at the bottom of the work area:
– Choose continue if the server is not to be shut down if the critical
temperature is reached at the selected sensors.
– Choose shutdown-and-power-off if the server is to be shut down and
powered down if the critical temperature is reached at the selected
sensors.
Ê Click Apply to the selected Sensors to activate your settings for the selected
temperature sensors.