FUJITSU INTEGRATED REMOTE MANAGEMENT CONTROLLER IRMC S2/S3 - Manual (Page 201)

iRMC S2/S3 201
Power Consumption
Power Consumption Options
The Power Consumption Options group allows you to select the power control
mode and specify whether the power consumption should be monitored over
time.
Power Control Mode
Mode for controlling the power consumption of the managed server:
– Power Mgmt. Disabled :
The iRMC S2/S3 allows the operating system to control power
consumption.
– Best Performance :
The iRMC S2/S3 controls the server to achieve best performance. In
this event, power consumption can rise.
– Low Noise : (iRMC S3 only)
The iRMC S3 controls the server to achieve the lowest possible noise
emission. This feature is not supported for all PRIMERGY servers
and only available for specific configurations.
– Minimum Power :
The iRMC S2/S3 controls the server to achieve the lowest possible
power consumption. In this event, performance is not always ideal.
– Power Limit :
The Power Limit Options group is displayed (see "Power Limit Options"
on page 204 ).
– Scheduled :
The iRMC S2/S3 controls power consumption in accordance with a
schedule that you can define using the SCU (see
"Scheduled Power
Consumption Configuration" on page 202 ).
Power Monitoring Units
Unit of electrical power used to display power consumption:
– Watt
– BTU/h (British Thermal Unit/hour, 1 BTU/h corresponds to 0.293
Watt).