FUJITSU INTEGRATED REMOTE MANAGEMENT CONTROLLER IRMC S2/S3 - Manual (Page 169)

iRMC S2/S3 169
iRMC S2/S3 - Information, firmware and certificates
7.6.2 Save iRMC S2/S3 Firmware Settings -
Save firmware settings
The Save iRMC S2/S3 Firmware Settings page allows you to save the current
firmware settings and a number of other settings for the iRMC S2/S3 in a file.
Additionally, you can load the firmware settings onto the iRMC S2/S3 again.
– The firmware settings selected under Save iRMC S2/S3 Firmware settings in
ServerView® WinSCU XML format are saved in a file with the name
iRMC_S2_settings.pre or iRMC_ S3_settings.pre , respectively. In the Server
Configuration Manager (WinSCU), you can use the Import... button to load
the firmware settings onto the iRMC S2/S3 again.
– The firmware settings selected under Save iRMC S2/S3 Firmware settings in
binary (BMCCLONE.exe) format are saved in a file with the name
iRMC_S2_settings.bin or iRMC_ S3_settings.bin, respectively. You can use
the Import iRMC S2/S3 Firmware settings in ServerView® WinSCU XML format
from file group to load the firmware settings onto the iRMC S2/S3 again.
V
CAUTION!
Always save the setting using
Save iRMC S2/S3 Firmware settings in ServerView® WinSCU XML format .
Save iRMC S2/S3 Firmware settings in binary (BMCCLONE.exe) format
should only be used if the system module of the managed server is being
replaced.
I
If you want to save the user settings (Include User Settings ), you require
Configure User Accounts permission. In all other cases, Configure
iRMC S2/S3 settings permission is sufficient.