FUJITSU INTEGRATED REMOTE MANAGEMENT CONTROLLER IRMC S2/S3 User Manual
Page 415
iRMC S2/S3
415
Configuring the iRMC S2/S3 via SCCI and scripted configuration
Parameters of SCCI provider-specific commands
The following SCCI-provider-specific commands are available:
Operation Code (
OC
)
Hex value or string specifying the command / operation code.
I
The iRMC S2/S3 only supports a limited set of SCCI commands.
For a list of supported commands see
supported by the iRMC S2/S3" on page 420
Operation Code Extension (
OE
)
Hex value for extended operation code. Default:
OE=0
For ConfigSpace Read-/Write operations, this value defines the
ConfigSpace ID.
Object Index (
OI
)
Hex value selecting an instance of an object. Default:OI=0"
Operation Code Type (
Type
)
For configuration settings, the values
GET
(read operation) and
SET
(write
operation) are supported. Default: Type=GET
I
SET
operations require data. For specifying the appropriate data
type, use the
Data (DATA)
parameter described below.
Cabinet Identifier (
CA
)
Allows you to select an extension cabinet and use its cabinet ID number.
I
Do not use this parameter to request for the system cabinet!
Data (
DATA
)
If a
SET
parameter (write operation) is specified: Data type (
Type
parameter), and, in some cases, data length (
LEN
parameter) are
required.
Currently, the following data types are supported:
–
xsd::integer
Integer value
Example
1234