FUJITSU INTEGRATED REMOTE MANAGEMENT CONTROLLER IRMC S2/S3 - Manual (Page 185)

iRMC S2/S3 185
iRMC S2/S3 - Information, firmware and certificates
Update file
File in which the firmware image is stored.
I
The files listed below each allow you to update one component of
the iRMC S2/S3 firmware every time TFTP is started (runtime
firmware and SDR record).
The file rt_sdr__4_08g_00.bin is also available for
some PRIMERGY servers / blade servers. This allows you to
update all the components of the iRMC S2/S3 firmware in a single
operation using a TFTP server.
dcod.bin
Updates the runtime firmware.
.SDR
Updates the SDR record.
Flash Selector
Specify what iRMC firmware is to be updated.
You have the following options:
– Auto - inactive firmware
The inactive firmware is automatically selected.
– Low Firmware Image
The low firmware image (firmware image 1) is selected.
– High Firmware Image
The high firmware image (firmware image 2) is selected.
Ê Click Apply to activate your settings.
Ê Click TFTP Test to test the connection to the TFTP server.
Ê Click TFTP Start to download the file containing the firmware image from the
TFTP server and to start updating the iRMC S2/S3 firmware.