Irmc s2/s3-specific commands – FUJITSU INTEGRATED REMOTE MANAGEMENT CONTROLLER IRMC S2/S3 User Manual
Page 402

402
iRMC
S2/S3
IPMI OEM Commands supported by the iRMC S2/S3
12.1.2.7 iRMC S2/S3-specific commands
F5 10 - Get System Status
This command returns a variety of internal information on the system such as
the power state, error status, etc.
I
The Timestamp is only relevant for evaluating the
Notifications
Byte.
Request Data
-
B8
NetFnlLUN: OEM/Group
-
F5
Cmd : Command Group Memory
1:3
80 28 00
IANA-Enterprise-Number FTS, LS byte first
4
10
Command Specifier
5:8
Timestamp
Response Data
-
BC
-
F5
1
Completion Code
2:4
80 28 00
IANA-Enterprise-Number FTS, LS byte first
5
System Status (For details see below.)
6
Signaling (For details see below.)
7
Notifications (For details see below.)
8
POST Code
System Status
Bit 7 - System ON
Bit 6 -
Bit 5 -
Bit 4 - SEL entries available
Bit 3 -
Bit 2 - Watchdog active
Bit 1 - Agent connected
Bit 0 - Post State