FUJITSU INTEGRATED REMOTE MANAGEMENT CONTROLLER IRMC S2/S3 - Manual (Page 397)

iRMC S2/S3 397
IPMI OEM Commands supported by the iRMC S2/S3
20 05 - Get Firmware Selector
This command returns the current firmware selector setting.
Request Data - 20 NetFnlLUN: Firmware
- 05 CMD : Command Group Firmware
Response Data - 24
- 05
1 Completion Code
2 Next Boot Selector:
0 = Auto (Select EEPROM with highest firmware version.)
1 = low EEPROM
2 = high EEPROM
3 = Auto oldest version (Select EEPROM oldest firmware
version.)
4 = MRP (Select most recently programmed firmware.)
5 = LRP (Select least recently programmed firmware.)
3 Running Selector; tells which firmware is currently running:
1 = low EEPROM
2 = high EEPROM